Fire Fighter
Don't let your house
go up in Flames!
Get it Right the First time!

House Fire

Wiring Done Right - Residential Wiring - The Right Way

Residential Wiring -  The Right Way!

Contact us | Creator Info | Legal | Site Map

Ez Forums

Got Questions? Get Answers!
Ask the Experts on EZ-FORUMS

Electrical Wiring and Safety

Animated Fan

Fan / Light Combination Switch Wiring

Switched Separately

Printer Friendly Version of Article

WHILE EXTREME CARE HAS BEEN IMPLEMENTED IN THE PREPARATION OF THIS SELF-HELP DOCUMENT, THE AUTHOR AND/OR PROVIDERS OF THIS DOCUMENT ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS, NOR IS ANY LIABILITY ASSUMED FROM THE USE OF THE INFORMATION, CONTAINED IN THIS DOCUMENT, BY THE AUTHOR and / OR PROVIDER.

Read the legal disclaimer page - click the legal link in the menu above

For those that live where the new 2011 NEC code is in effect, please read
2011 NEC New Rule 'Switch Connections'
If this applies to you, the switch wiring options that is in compliance with this new rule will be indicated bellow as '2011 NEC compliant'


For fan / light combination fixtures, this section has wiring scenarios that will use different switches to control the light and fan. The fan in each of the options is controlled by one basic switch at one location, the lights of the combination fixture is controlled by either a single basic switch or two 3 way switches. A set of 3 way switches may be desired for instances where the light / fan combination fixture is installed on the ceiling of a staircase or in a long hallway / large room. Any speed or direction controls for the fan would be controlled usually by a pull  spring on the combination fixture unless you install a specialized speed control device which would take the place of the standard basic switch depicted in the articles (see the warning message bellow)

WARNING (please read)....

Do not use a regular light dimmer on the fan, fans require a extra jolt to get the blade moving, there are special fan controllers that can be used to control fan speed at the switch location (replacing the regular switch with the special fan speed controller) these are specially made to control speed and insure the fan does get moving when on, the danger in regular dimmers not meant to control a fan is that the fan could get some power applied to it but not enough to get it moving what that can do is heat it up and become a fire hazard. If using a special fan controller ensure that the fans pull string (if they have it) are set to max speed and let the fan controller control the speed. You may still have another pull string on the fan that can change blade direction.

If you require further information or clarification please ask our experts on our forums


By: Donald Kerr

Social Media Links

Help spread our popularity, get the word out.

QUICK MENU 

Home (Wiring Done Right)
2011 NEC New Rule 'Switch Connections'
3 Way Switch
4 Way Switch
Accessory Buildings
Adding Outlet
Aluminium Wiring
Arc Circuit Protection
Backup Generators / Transfer Switches
Basic Switch
Box Fill Calculations
Breaker Circuit Types
Conduit Fill
Convert Pull String to Wall Switch
Definitions
Doorbell System / Wiring
Dryer Outlet
Electrical Box Types
Electrical Dangers
Electrical Safety
Electricity, What is It?
Fan / Light Combo
Switched Together  
Switched Separately  
Fan Always Hot / Light Switched  
Generation / Distribution Grid
GFI Outlets
Home Electrical Design
Main Electrical Panel
Multiple Fixture Wiring
Old Home / Wiring
Outlet, Half Switched
Range Outlet
Series Switches
Split Circuit Outlet
Sub Panel
Switch Outlet Types
Testing Equipment
Tools, Basic Tools
Trouble Shooting
Wire Cable Types
Wire Connections
Wire Routing Basics
Work Shop Wiring
World, Electricity around the

Copyright 2012 +
All Rights Reserved
Donald Kerr / Wiring Done Right
https://www.wiringdoneright.com/